V164012 DC / CC Sirai electrovalve / Emerson / ASCO proportional
V164012 DC / CC Sirai electrovalve / Emerson / ASCO proportional.
Characteristics:
- Top quality.
- Finishes and tolerances according to DIN standards.
- 2x M5.
- 12-24V +/- 10%, DC/CC, 4W.
- Normally closed.
- Proportional.
- Passage diameter: 1,6mm.
- Nitril seal.
- Cº: from -10ºC to 90ºC fluid.
- For air or water.
- Formerly V164B05.
- Warranty: 3 months.
GENERAL CHARACTERISTICS
Direct operated electrovalve with smaller dimensions.
Proportional control of the flow rate by variation of the electrical signal.
The diagram on the back shows an example of a flow curve / electrical signal with an entry pressure of 3 bar.
Suitable for liquid fluids and gases (check the compatibility of the fluid with the materials in contact).
MATERIALES IN CONTACT WITH THE FLUID
Brass body
NBR seal
Internal components Stainless steel
Brass seat
Stock tube Stainless steel
COIL
Continuous service ED 100% (see note “A” on the back)
Molding material PA (Polyamide) reinforced with glass fibers
Insulation class F (155°C)
Room temperature -10°C +60°C
Electrical connections DIN 46340
Protection rating IP 65 (EN 60529) with micro-connector
DC voltages 12 – 24V
TECHNICAL CHARACTERISTICS
Maximum allowable pressure (PS) 16 bar
Fluid temperature -10°C +90°C
Maximum viscosity 3°E (22 cStokes or mm2/s)
Sirai a company belonging to the ASCO Numatics group.