V121V02 DC /CC Sirai Electrovalve / Emerson / ASCO entry
V121V02 DC /CC Sirai Electrovalve / Emerson / ASCO entry.
Characteristics:
- Top quality.
- Finishes and tolerances according to DIN standards.
- 2x 1/4″.
- 24V +/- 10% DC/CC, 9W.
- Normally closed.
- Passage diameter: 4,5mm.
- Viton seals.
- Cº: from 0ºC to 130ºC.
- For air, water or gas.
- Warranty: 3 months.
GENERAL CHARACTERISTICS
Directly controlled electrovalve. Brass body
Suitable for liquid fluids and gases (check the compatibility of the fluid with the materials in contact).
MATERIALES IN CONTACT WITH THE FLUID
NBR or FPM or EPDM seals
Internal components Stainless steel
Brass seat
Guide tube Stainless steel
Offset ring Copper
TECHNICAL CHARACTERISTICS
Maximum allowable pressure (PS) 40 bar
Opening time 20ms
Closing time 20ms
Fluid temperature -10°C +90°C (NBR)
0°C +130°C (FPM)
-10°C +140°C (EPDM)
Maximum viscocity 5°E (37 cStokes or mm2/s)
COIL
Continuous service ED 100%
Molding material PPS (polyphenylene-sulfide) reinforced with glass fibers
Insulation class F (155°C) on request cl.H (180°C)
Room tempertaure -10°C +50°C
DIN electrical connection 46340 – 3-pole connectors (EN175301-803)
Protection rating IP 67 (EN 60529) with connectors
DC voltages 12-24V (+10% -5%)
c.a. ZA10A: 24V/50Hz – 110V/50Hz (120V/60Hz) –
230V/50Hz (+10% -15%)
(Other voltages and frequencies on request and according to quantities)
CERTIFICATION
UL certification (Class F) – for UL cl. H: ZA34
IMQ CSV certification, for more details see ZA10 datasheet.
In accordance with D.m. 174/2004 and Reg. CE 1935/2004
Sirai a company belonging to the ASCO Numatics group.