V162B02 DC / CC Sirai electrovalve / Emerson / ASCO
V162B02 DC / CC Sirai electrovalve / Emerson / ASCO.
Characteristics:
- Top quality.
- Finishes and tolerances according to DIN standards.
- 2x M5.
- 24V +/- 10%, DC/CC, 4W.
- Normally closed.
- Passage diameter: 2,0mm.
- Nitril seals.
- Cº: from 0ºC to 90ºC fluid.
- For air or water.
- Warranty: 3 months.
GENERAL CHARACTERISTICS
Directly controlled micro electrovalve.
Small size, high response speed and high number of cycles. Designed for battery mounting to make valve groups
with a single input and several independent outputs. Seals for assemblies supplied with the valve.
Entry head and seal supplied separately.
An orifice in the valve body allows the valve to be connected to the
head entry with another device (e.g. pressure reducer). Suitable for liquid fluids and gases (check the compatibility of the fluid with the materials in contact).
MATERIALES IN CONTACT WITH THE FLUID
Brass body
FPM – NBR (Seals)
Internal components Stainless steel
Brass seat
Brass cylinder head pipe
COIL
Continuous service ED 100%
Molding material PA (Polyamide) reinforced with glass fibers
Insulation class F (155°C)
Room temperature -10°C +60°C
DIN 46340 electric connection
Protection rating IP 65 (EN 60529) with micro connectors
DC voltages 12 – 24V (+10% -5%)
(Other voltages on request and according to the
quantities)
TECHNICAL CHARACTERISTICS
DIN 46340 electric connection
Maximum allowable pressure (PS) 16 bar Protection rating IP 65 (EN 60529) with micro-connectors
Opening time from 5ms to 10ms DC voltages c.c. 12 – 24V (+10% -5%)
Closing time from 5ms to 10ms (Other voltages upon request and depending on quantities)
Fluid temperature -0°C +90°C
Maximum viscosity 3°E (22 cStokes or mm2/s)
Sirai a company belonging to the ASCO Numatics group.